Traffic: Adhesives & Anchors
Support Products to Successfully Install our Products
Pexco offers a variety of adhesives, primers, epoxies and bolts to successfully install many of our products. Please use the application chart below as a guide.
DAPCO Adhesive 795A
A one-part, fast cure adhesive,
for bonding concrete barrier markers, guardrail reflectors and other delineation products. 795A requires no mixing, is effective over a broad temperature range, has excellent weathering properties and offers “primer-less” adhesion to concrete, asphalt and steel. (10oz and 10oz tubes available) Used with standard caulking gun.
 |
Hi-Tack Butyl Adhesive - "Peel 'N Stick"
Butyl adhesives offer quick and reliable adhesion for temporary installation of traffic control products. Available in 8” x 8” pads and 45” x 4” rolls. Suitable for bonding many of our delineation and marking products. The standard color is black, but gray is available by special order. |
Pavement Primer - Used with Butyl
We carry an exceptionally strong contact type adhesive primer that features fast adhesive strength build-up to assist difficult marker or delineator installations. The primer requires only 1 minute of drying time before placement of the marker or delineator. Ad additional benefit of the primer is the precise spray control which places the primer exactly where it is needed with a minimum of mess.
SuperBundy Adhesive - "Heat 'N Stick"
SuperBundy Adhesive is perfect for adhering larger objects like rumble strips, curb sections and FG 300 bases on horizontal surfaces and other objects requiring stronger adhesion. This non-toxic, zero VOC adhesive is designed for use with traffic control objects that are subject to high stress impacts. This adhesive has resilient characteristics which enable it to remain flexible throughout its lifetime. Requires 2 pads per install. |
|
|
Road Marker Epoxy
Our rapid setting 2-part gray road marker epoxy is the most reliable permanent adhesion product available. Typical applications include FG 300 channelizer posts, permanent rumble strips and curb sections. |
Anchor Bolts
Removable and re-usable on-piece anchor bolts for FG 300 bases and curb sections have a finished hex head,an integral washer, dual-lead threads and a chamfered tip. |
 |
One-piece bolts eliminate the need to keep track of and assemble separate pieces of traditional molly bolts before installation. Dual-lead threads prevent the bolts from spinning in the holes when tightened.
Adhesives Application Chart
