Xtra-Flex™ HS-914

HS-914

Ultra-flexible, crystal clear, low shrink temperature, non-phthalate Polyvinylchloride heat shrink tubing is ideal for tube joining, transitioning and providing transparent protection.

Request More Information

"*" indicates required fields

This field is hidden when viewing the form

Applications

flex-product-img

Features and Benefits

* Including chlorinated cleaners, lubricating grease, penetrating oils, electrical insulation oils, and others.

Technical Specifications

  • Shrink Ratio: 2:1 NOTE: HS-914 can be customized to your specifications for expanded and recovered diameters, wall thicknesses and shrink ratios
    Minimum Recommended Shrink Temperature: 93°C (200°F)
  • Operating Temperature Range: -20°C to 60°C (-4°F to 140°F)
  • Longitudinal Shrinkage: 20% maximum at full recovery
  • Chemical Resistance: Resistant to many chemicals including isopropyl alcohol and saline solution
  • Standard Color: Crystal Clear

Physical / Electrical / Chemical Properties

  • Specific Gravity: 1.10
  • Durometer: Shore D 33
  • Tensile Strength: 2900 psi
  • Dielectric Strength: 650 vpm
  • Ultimate Elongation: 300%
  • Brittle Point: -47°C

Storage

  • Heat sensitive — Store at 70°F or below
  • When not under pressure, use within 30 days
AUTOCLAVE CYCLE TEST:
20 cycles @ 134˚C 30 psig for 15 min. with fast dry cycle, followed by test for:
Property Test Method Typical Value
Volume Resistivity @ 500 volts ASTM D 257 No change from original
Dielectric Strength in air @ 500 kv/min rise ASTM D 149 No change from original
Dielectric Constant @ 1 MHz ASTM D 150 No change from original
Dissipation Factor @ 1 MHz ASTM D 150 No change from original

Notice to User: It is imperative that manufacturers and end-users understand that the electro-surgical instruments should be placed separately, without overlay, on autoclave trays. Potential damage caused by overlay in the autoclave will significantly reduce this and any other dielectric insulator’s ability to pass the 20 cycles of autoclave required by the AAMI.

All statements and recommendations are based on technical data that INSULTAB believes to be true and reliable. It is the responsibility of the user to determine functionality and suitability. If you have any questions on the use or handling of this product, please contact us at 800-468-4822.

Standard Dimensions

Expanded I.D. Minimum Recovered I.D. Maximum Recovered Wall Nominal Standard Packaging (per Box) Product is Supplied Pressurized in Coils or on Plastic Spools
Size in. mm in. mm in. mm Ft. / Coil or Spool Total Ft. / Box
3/32 .093 2.36 .046 1.17 .020 0.51 1,000′ 2,000′
1/8 .125 3.18 .062 1.58 .020 0.51 1,000′ 2,000′
3/16 .187 4.75 .093 2.36 .020 0.51 1,000′ 2,000′
1/4 .250 6.35 .125 3.18 .025 0.64 500′ 1,000′
3/8 .375 9.53 .187 4.75 .025 0.64 200′ 600′
1/2 .500 12.70 .250 6.35 .025 0.64 200′ 600′

We will manufacture to your precise specifications

All information presented is believed to be reliable and is offered only as a guide to product selection. As each application is unique, Insultab can make no warranties as to the suitability of any products for a particular use. Specifications are subject to change.

 

×
Scroll to Top