Pexco Crystal Clear VinylGuard
A “Crystal Clear” choice to protect, bundle and organize like never before
Request More Information
"*" indicates required fields
Crystal Clear VinylGuard
Pexco Crystal Clear VinylGuard offers a transparent, conforming fit that allows for visual inspection of critical information, even over irregular shapes. It is designed for bundling, securing, and wrapping, with resistance to most chemicals, oils, and moisture. This vinyl guard is made in the USA from premium grade, 100% virgin materials and is easy to apply and remove, making it a versatile and environmentally friendly option for a wide range of applications.
Features & Benefits
- Crystal Clear VinylGuard provides a transparent, conforming fit, even over irregular shapes, allowing for visual inspection of critical information
- Shrink over logos, instructions, warnings, etc., for a ‘see-through’, protective, conforming fit
- Perfect for bundling, securing, and wrapping
- Resists most chemicals, oils, moisture
- Quick and easy to apply using a heat gun or an oven for economical, large-volume processing
- Made in the USA from the finest premium grade, 100% virgin materials
- Easy to remove and replace
- Environmentally friendly and safe – contains no hazardous materials
Applications
- Quick and easy to apply using a heat gun or an oven for economical, large-volume processing
- Enhanced with the strongest UV-resistant polymers for long-lasting, outdoor applications — will not fade, crack, peel, rust or stain
- Far longer-lasting than painting, powder coating or dipping
- Resists chemicals, oils, grease, acids, chlorinated cleansers, salt, salt water, moisture, fungus
How to Apply Pexco VinylGuard
Fast and Easy Application
- Cut a length of VinylGuard 4″ longer than the post, to allow for longitudinal shrinkage.
- Slide the vinyl over the post.
- Hold the heat gun 3″ to 4″ away from the material to prevent burning.
- SLOWLY begin shrinking at one end. Rotate the post while rapidly moving the heat gun back and forth to avoid burning the material. Apply sufficient heat to remove any wrinkles. The vinyl will quickly shrink and tightly conform to the post.
- Trim the excess vinyl with a sharp blade or utility knife and apply a little heat to remove any wrinkles.
- After shrinking, VinylGuard will not loosen but will continue to tighten over time in sunlight.
NOTE: Open flame sources of heat are not recommended for shrinking as they may burn or damage the vinyl and may not ensure uniform shrinking.
Tips… Be Creative with Multi-Colored Posts
- Add a stripe to a post: Choose a color for the stripe and cut the length desired. Slide the stripe over the post and shrink it in the position desired.
- Highlight entrances and exits.
- Color code posts to draw attention to VIP parking areas and particular parking spaces.
- Match posts to the colors of signs, logos, backgrounds, etc.
- Identify environmentally sensitive or dangerous areas.
VinylGuard Sizes and Specifications
These are the standard VinylGuard product sizes and dimensions available in stock. We also manufacture custom dimensions and shrink ratios for specific applications. Please contact us to discuss your specific application requirements.
| Expanded I.D. Minimum | Fully Recovered I.D. Maximum | Recovered Wall Thickness Nominal | Standard Product on Spools | ||||
|---|---|---|---|---|---|---|---|
| Size | in. | mm | in. | mm | in. | mm | Feet per Spool |
| 5/8″ | .625 | 15.88 | .313 | 7.94 | .033 | 0.84 | 250′ |
| 3/4″ | .750 | 19.05 | .375 | 9.53 | .033 | 0.84 | 250′ |
| 1″ | 1.000 | 25.40 | .500 | 12.70 | .038 | 0.97 | 250′ |
| 1 1/4″ | 1.250 | 31.75 | .625 | 15.88 | .041 | 1.04 | 250′ |
| 1 1/2″ | 1.500 | 38.10 | .750 | 19.05 | .043 | 1.09 | 100′ |
| 2″ | 2.000 | 50.80 | 1.000 | 25.40 | .048 | 1.22 | 100′ |
| 2 1/2″ | 2.500 | 63.50 | 1.250 | 31.75 | .058 | 1.47 | 100′ |
| 3″ | 3.000 | 76.20 | 1.500 | 38.10 | .068 | 1.73 | 50′ |
| 4″ | 4.000 | 101.60 | 2.000 | 50.80 | .073 | 1.85 | 50′ |
| 5″ | 5.000 | 127 | 2.500 | 63.50 | .080 | 2.03 | 25′ |