Our Products
Our Brands
Markets
Capabilities
About Pexco
Curb Systems & Lane Separators
FG 300 Interstate Grade Curb System
Increased Visibility for Superior Channelization
By using a post every 3 feet, the FG300 Curb System creates a more effective visual and psychological barrier than other curb systems. Even at moderate speeds, the array of channelizer posts creates a “picket fence” effect, strongly deterring motorists from crossing.
Curb System Withstands Multiple High Speed Impacts
Proven in testing at the Texas Transportation Institute, the unique polymers used in the FG 300 curb sections and upright posts absorb high-speed vehicle impacts, allowing the system to sustain hits at high speed with no damage to the system or danger to the driver. The FG 300 Curb System meets or exceeds federal specifications for lane separator curb systems.
Reflective Sheeting Matched to the Durability of our Posts
Ordered with factory-applied Prismatic Super High Intensity, Flexible High Intensity retroreflective sheeting. Call for details regarding the availability of decals custom printing options. Specify reflective grade, color and size when ordering.
Uprights are Replaced Quickly & Easily
FG 300 posts are attached to our curb units with two simple Quick Release pins. It takes only seconds to replace a damaged post using the Pin Removal Tool. This is very important for work zone installations where speed and ease of replacement are of the utmost importance. Quick replacement of damaged posts means less exposure for workers, a big plus for safety!
1-Piece for Easier Handling
The system is installed with standard power tools and removable and re-usable 1-piece anchor bolts or Adhesive 795 A. Installation typically takes one worker less than five minutes per section.
Applications
- Highway Median separators that
install quickly at a low cost - Rail-highway crossings greatly reduce
gate violations - Work Zones: safe temporary
separation of traffic - Thru Lane Protection: keep vehicles
separated in critical areas on toll roads - Prohibit Illegal Turns by channelizing
vehicles at dangerous intersections - Acceleration Lanes: speed up merging
Vertical Panels Provide Increased Guidance
Vertical panels on curb systems can take a tremendous abuse. The FG 300 EFX with factory installed vertical panels provide dramatically improved durability. The combination of the unique geometry and urethane alloy used to build the EFX allows it to rebound and re-orients the panel towards traffic after impact.
Our EFX posts support an array of vertical panels for increased visibility and directional information. Vertical panels conform to the 2024 UTCD, and are available in two standard sizes, 833 (33” overall height with an 8″ x 30″) and 422 (22″ overall height with a 4″ x 20″ reflective panel).
Custom configurations are available by special order. Panels are available in Orange-on-White or Black-on-Yellow in “Sergeant Stripe” or Left-hand slant styles and can be sheeted with High Intensity, Prismatic HI, Diamond Grade or Abrasion resistant Super-HI Prismatic sheeting to provide the highest levels of reflectivity and guidance.
Polyurethane the Material of Choice
The FG 300 Models UR and EFX are both made from polyurethane. This polymer provides very high tensile and elongation properties, with superior resistance to tearing and puncture.
Polyurethane maintains its flexibility to -50° F, and its toughness during exposure to fuels, oils and grease. It is simply the material of choice for “can’t fail” applications. The urethane alloys used in the FG 300 Models UR and EFX absorb impact better than any other flexible polymer, allowing these tubes to sustain numerous hits at high speed. A longer lasting post is a safer post for your roadways.
FG 300 Interstate Grade Curb System
Request More Information
Have a question or need a quote? Our team is ready to help with product specifications, custom requirements, and technical support.
"*" indicates required fields
Resources and Downloads
-
FG 300 Interstate Grade Curb Product Information Sheet
View Document
-
Interstate Grade Curb System Installation Procedure Using Bolts
View Document
-
FG 300 Interstate Grade Curb Options And Applications
View Document
-
FG 300 Interstate Grade Curb System Installation Procedure Using Epoxy
View Document
-
FG 300 Interstate Grade Curb System – CAD Specifications
View Specifications
-
FG 300 Curb System Anchor Bolt and Drill Bit – Material Specification
View Specifications
FG 300 Interstate Grade Curb System State Approvals
This product is approved for use by the official transportation agency by the following states:
- Alabama
- Alaska
- California
- Colorado
- Delaware
- District Of Columbia
- Florida
- Idaho
- Iowa
- Kansas
- Kentucky
- Louisiana
- Maine
- Maryland
- Massachusetts
- Michigan
- Minnesota
- Mississippi
- Missouri
- Nebraska
- Nevada
- New Hampshire
- New Jersey
- New Mexico
- New York
- North Carolina
- Oklahoma
- Oregon
- Pennsylvania
- South Dakota
- Tennessee
- Texas
- Virginia
- Washington
- Wisconsin
WARNING: Local Road Owners (including municipalities, their departments, affiliates, contractors, and agents) are solely responsible for placing, maintaining, and replacing traffic control devices per FHWA standards. Pexco provides devices tested to industry standards but is not liable for any incidents resulting from lack of inspection or upkeep by Local Road Owners.