Our Products
Our Brands
Markets
Capabilities
About Pexco
Altaflo® 2E0 FEP Tubing & Pipe
Specially designed for use in environmental sampling applications
Altaflo® 2E0 Enviro Series FEP (fluorinated ethylene propylene) tubing is designed specifically for use in environmental sampling applications.
This cost effective tubing is the preferred product for applications requiring the purity of FEP without exposure to aggressive chemical or other harsh conditions.
Altaflo® 2E0 Series does not impart taste, odor or other contaminants which make it ideal for bailer tubes used in ground water applications.
For more critical application requirements, we suggest the use of Altaflo® 200 FEP or Altaflo® 400 PFA Tubing and Pipe.
Features
- Excellent UV transmission
- Low permeability
- High thermal stability
- Excellent clarity
- Moisture absorption nearly zero
- Does not impart taste, odor, or contaminants
- Non-flammable
Applications
- Groundwater monitoring
- Air sampling
- Laboratory applications
- Water process
- UV water purification systems
Specifications
General
FEP meets the requirements listed in ASTM D2116
Temperature
-100° F to 400°
Flammability
FEP is non-combustible and does not promote flame spread
| Part Number | ID | OD | OD Tol | Wall | Wall Tol |
|---|---|---|---|---|---|
| 2E0-0125-030-0C | .062 | .125 | .003 | 0.030 | .003 |
| 2E0-0250-030-XX | .190 | 1/4 | .004 | 0.030 | .003 |
| 2E0-0313-030-XX | 1/4 | 5/16 | .005 | 0.030 | .003 |
| 2E0-0375-030-XX | 5/16 | 3/8 | .005 | 0.030 | .003 |
| 2E0-0500-030-XX | 7/16 | 1/2 | .005 | 0.030 | .003 |
| 2E0-0250-040-XX | .170 | 1/4 | .005 | 0.040 | .003 |
| 2E0-0375-062-XX | 1/4 | 3/8 | .005 | 0.062 | .003 |
| 2E0-0500-062-XX | 3/8 | 1/2 | .005 | 0.062 | .003 |
Additional sizes up to 4” OD are available as custom extrusions — minimum order requirements may apply. Please contact Pexco’s office for details. This tubing is not recommended for aggressive chemical applications — please refer to Altaflo 200 or Altaflo 400.
| Part Number | OD | Wall | ID | Bend Radius | Working Pressure (PSI) |
|---|---|---|---|---|---|
| 2E0-0125-030-0C | 0.125 | 0.030 | .062 | 1/2″ | 360 |
| 2E0-0250-030-XX | 0.250 | 0.030 | .190 | 1″ | 195 |
| 2E0-0313-030-XX | 0.313 | 0.030 | .250 | 1-3/4″ | 156 |
| 2E0-0375-030-XX | 0.375 | 0.030 | .313 | 2-1/2″ | 130 |
| 2E0-0500-030-XX | 0.500 | 0.030 | .438 | 6″ | 97 |
| 2E0-0250-040-XX | 0.250 | 0.040 | .170 | 1″ | 260 |
| 2E0-0375-062-XX | 0.375 | 0.062 | .250 | 1″ | 269 |
| 2E0-0500-062-XX | 0.500 | 0.062 | .375 | 2″ | 200 |
The above information is based on tests performed at 73° F and can vary in individual applications based on parameters such as temperature, chemical concentration, pressure, etc. Please consult factory for details. For an estimate on burst pressure at ambient temperature we consider a 3:1 ratio when exposure temperature is 73° F. However Pexco does not recommend exceeding the suggested Working Pressure listed.
| Property | ASTM Test Method | Units | Value |
|---|---|---|---|
| Upper Service Temp. (Long Term) | — | °F | 400 |
| Specific Gravity | D 792 | — | 2.12–2.17 |
| Tensile Strength | D 1708 | PSI | 3,500 |
| Elongation | D 638 | % | 300–400 |
| Flex Modulus | D 790 | PSI | 90,000 |
| MIT Flex Life | D 2176 | cycles | 5,000 |
| Hardness | D 2240 | Shore D | 57–60 |
- General: Meets ASTM D 2116
- Temperature: -100°F to 400°F
- Flammability: FEP is non-combustible, does not promote flame spread
- Use Cases: Environmental sampling — groundwater monitoring, air sampling, lab, water process, UV water purification
- Restrictions: NOT for aggressive chemical applications — see Altaflo 200 FEP or 400 PFA
Altaflo® 2E0 FEP Tubing & Pipe
Request More Information
Have a question or need a quote? Our team is ready to help with product specifications, custom requirements, and technical support.
"*" indicates required fields
